|
SFD Surge Filters 20A
Novaris SFD surge filters provide the highest level of protection for critical and essential equipment up to 20A per phase.
SFD1 - 20 - 13 - 275-L : Filter, 1 Phase, 20A, 13kA, 275VRMS BASIC, LED indicator - 312 USD
SFD1 - 20 - 13 - 275-A : Filter, 1 Phase, 20A, 13kA, 275VRMS BASIC, Alarm contact and LED indicator
SFD1 - 20 - 50 - 275-L : Filter, 1 Phase, 20A, 50kA, 275VRMS BASIC, LED indicator - 349 USD
SFD1 - 20 - 50 - 275-A : Filter, 1 Phase, 20A, 50kA, 275VRMS BASIC, Alarm contact and LED indicator 374 USD
SFD3 - 20 - 13 - 275-A : Filter, 3 Phase, 20A, 13kA, 275VRMS BASIC, Alarm Contact & LED indicator
SFD3 - 20 - 13 - 275-L : Filter, 3 Phase, 20A, 13kA, 275VRMS BASIC, LED indicator - 911 USD
SFD3 - 20 - 50 - 275-A : Filter, 3 Phase, 20A, 50kA, 275VRMS BASIC, Alarm Contact & LED indicator - 1 041 USD
SFD3 - 20 - 50 - 275-L : Filter, 3 Phase, 20A, 50kA, 275VRMS BASIC, LED indicator -976 USD
- Giá trên chưa bao gồm thuế VAT 10%.
- Bảo hành theo tiêu chuẩn của nhà sản xuất.
|
Standards Compliance
|
| IEC 61643-1 class II, III |
| AS/NZS 1768 categories A, B |
| IEEE C62.41 categories A, B |
| BS 6651 categories A, B |
| CP 33 categories A, B |
| IEC 1000-4-5 |
| UL1449 third edition |
| SFD1-20 13-275-A |
SFD1-20 50-275-A |
SFD3-20 13-275-A |
SFD3-20 50-275-A |
| Electrical Specifications |
| Connection type |
Series |
| Modes of protection |
All mode (L-N, L-PE, N-PE) |
| Nominal voltage |
U0 |
230V / 50Hz |
| Maximum continuous voltage |
Uc |
275V / 50Hz |
| Phases |
1 |
3 |
| Maximum discharge current (8/20μs) |
Imax |
13kA |
50kA |
13kA |
50kA |
| Maximum load curent |
IL |
20A |
| Protection stages |
Metal oxide varistor / LC filter / metal oxide varistor |
| Voltage protection level @ 3kA (8/20μs) |
U p |
<700V |
| Response time |
tA |
Instantaneous |
| Earth leakage current |
<500μA |
| Maximum voltage drop (% of U0) |
ΔU |
<1% |
| Displays (optional) |
LED power and status |
| Alarms (optional) |
Overcurrent / thermal, SPDT contact |
| Alarm isolation to active circuitry |
4kV |
|
|
|
|
|
|
| Mechanical Specifications |
| Operating temperature / humidity |
-40 to +40ºC / 0 to 90% non-condensing |
| Terminal capacity - power |
16mm2 |
| Terminal capacity - alarm |
2.5mm2 |
| Terminal screw torque - power |
1.0Nm |
| Terminal screw torque - alarm |
0.5Nm |
| Environmental |
IP 20 |
| Mounting |
TS35 DIN rail |
| Weight |
1.05kg |
1.55kg |
|
|
|
|
|
|
| Dimensions |
| Width* (can vary with options) |
118mm |
180mm |
| Height* (can vary with options) |
95mm |
| Depth |
78mm |
|
|
|
|
|
|
| Options |
| LED indication and external alarm |
Standard |
| LED indication only |
L |
| Polycarbonate enclosure |
P |
| Voltage variation |
Uc |
50V / 130V |
130V |
50V / 130V |
130V |
|