- Chức năng : Thiết bị cắt lọc sét trên đường điều khiển LCP-18
- Số Pha : 1 Pha.
- Dòng tải : 18 V.
- Dòng cắt sét : 250 A / 1 Pha
- Dòng cắt sét tổng : 250 A / 1 Pha
- Lắp đặt : Mắc nối tiếp.
LCP Load Cell Protector:
The Novaris LCP provides protection for both 4-wire and 6-wire loadcells as well as measuring instrument. The LCP is contain within an IP65 enclosure, or alternatively as a PCB only. Installation of the LCP is certified and does not afffect wieghbridge calibration.
LCP - 18 :Load cell protector, with terminal strip, 4 and 6 wire, enclosed 12V system
LCP - 18 - PCB:Load cell protector, with terminal strip, 4 and 6 wire, non enclosed 12V system
LCP - 36 : Load cell protector, with terminal strip, 4 and 6 wire, enclosed 24 V system
LCP - 36 - PCB:Load cell protector, with terminal strip, 4 and 6 wire, non enclosed 24V system
|
Standards Compliance
|
| IEC61643-21 |
| ITU-T K.44 |
| AS/NZS 1768 |
| IEEE C62.41 |
| BS 6651 |
| CP 33 |
| UL497B |
| NSC No: S366 |
| LCP-18 |
LCP-36 |
LCP-18-PCB |
LCP-36-PCB |
| Electrical Specifications |
| Connection type |
Series |
| Modes of protection |
Transverse and common mode |
| Maximum continuous voltage (DC) |
Uc |
18V |
36V |
18V |
36V |
| Maximum discharge current (8/20μs) |
Imax |
250A |
| Protection stages |
SAD and GDT |
| Maximum load current |
IL |
6.5A |
5A |
| Lines protected |
4 or 6 |
|
|
|
|
|
|
| Mechanical Specifications |
| Operating temperature / humidity |
-40 to +85ºC / 0 to 90% non-condensing |
| Terminal capacity |
2.5mm2 |
| Terminal screw torque |
0.5Nm |
| Ground connection |
M5 s/s stud |
100mm lead |
| Environmental |
IP 65 |
IP 00 |
| Mounting |
Panel mount |
| Enclosure / colour |
Aluminium / blue |
PCB only |
| Weight |
600g |
80g |
|
|
|
|
|
|
| Dimensions |
| Width |
116mm |
76mm |
| Height |
65mm |
63mm |
| Depth |
56mm |
20mm |
- Giá trên chưa tính thuế VAT 10%.
- Bảo hành theo tiêu chuẩn của nhà sản xuất.
*Xin vui lòng liên hệ:
- Tel : 08.38 159 690/92 ~ 0903.111680 (Anh. Hải)
- Fax : 08.38 159 694
- Email : sales@conigroup.com